Set up your Gateway PRO.
From the box to a steady green light in about five minutes: plug it in, put it on your Wi-Fi, and pair it with your account.
Step 1: Plug in the Gateway
Plug it into the car's diagnostic socket, usually under the dashboard by the steering wheel. Keep the cable away from the pedals. The light comes on within a few seconds.
- Blinking green Connecting.
- Steady green Your specialist is on the car.
The light on the Gateway tells you where the session is. Step 2: Connect your phone to the Gateway
For the first five minutes after it is plugged in, the Gateway offers its own setup Wi-Fi. Its name and password are on the setup sheet in the box and on the label of the Gateway. Open your phone's Wi-Fi settings and join it, or point the camera at the "Scan to join" code.
Your phone may say "No internet". That is normal: stay connected. The setup page opens by itself. If it does not, the setup sheet shows the address to type into your browser.
Step 3: Choose your Wi-Fi
Tap your network in the list (tap Scan again if it is missing), type its password and tap Save and connect. The page shows Connected when the Gateway has joined, and the light turns steady green when it is online and ready.
Using your phone as the Wi-Fi? Your own hotspot does not show in the list while the phone is connected to the Gateway. Type the hotspot's name and password by hand, exactly as your phone's hotspot settings show them.
On Gateway PRO LAN you can use a network cable instead: plug it in and the Gateway goes online by itself.
Step 4: Pair it with your account
Go to aimechanic.uk/gateway-pro, sign in or create a free account, tap Enter Pairing Code, type the pairing code from your setup sheet and tap Pair Device. The Gateway then appears under My Devices.
That is the set-up done. When you have a car that needs a specialist, book a session.
Good to know
- The light: steady green means online and ready. Green and white flashing means the Gateway is updating itself: do not unplug it. Green and cyan means a diagnosis is in progress.
- To change the Wi-Fi later, unplug the Gateway for five seconds and plug it back in. The setup Wi-Fi is there again for five minutes: repeat steps 2 and 3.
- Keep the setup sheet somewhere safe. It holds your Gateway's setup password and pairing code.
- Stuck? Message us on WhatsApp from the contact page and we will get it connected with you.