Skip to content
Garages with a Gateway PRO

Before your specialist session.

A specialist session is work on a live car. These are the things only you can do, because you are the one beside it. Please check each one before the session starts.

  1. The car is on a charger. A battery charger or battery support unit is connected and switched on, and it stays on until John tells you the session is finished. The session does not start below 12.4 V. For a software update the car needs a battery support unit that holds 13.0 V or more for the whole update. A trickle charger is not enough.
  2. Somebody is beside the car the whole time. A person who can work the ignition, pedals and switches when asked, and who answers the phone number given at booking.
  3. The car is safe to work on. Parking brake on, in Park or neutral, people and tools clear of moving parts. Fans, wipers, windows and the brakes may be operated during tests. If the engine has to run, the car is outside or on exhaust extraction.
  4. Everything electrical you do not need is off. Lights, blower, heated screens and seats.
  5. Nothing else is in the diagnostic socket. No other diagnostic tool is talking to the car, and any tracker or insurance box that plugs into the socket is out.
  6. The Gateway stays in. It is plugged in with its light on. Do not unplug it or switch the ignition off until you are told. For a software update the LAN cable is connected.
  7. You have told us what we need to know. The fault, what has already been replaced or tried, and anything unusual about the car: a remap or tuning (a software update will replace it), second-hand or non-original control units, water or accident damage, added electrics such as a towbar, lights or audio, a battery you know is weak.
  8. You have the owner's permission for the work, including coding or a software update if the job needs one, and they know the session is recorded.

Who answers for what

The specialistThe work carried out in the session: the diagnosis given, and any coding, adaptation or software update performed. If coding or a software update goes wrong during a session, it is ours to put right. That applies to every job, as long as the conditions above were met.
The garageThe car, the workshop and the people around it, the repair itself, and anything that follows from one of the conditions above not being met.
Not coveredFaults that were already on the car, and parts that fail through age or earlier damage. We show you what we found.

The battery voltage at the start and at the end of the session is shown on your job report.

Your session is recorded and encrypted

We record every diagnostic session, to monitor and improve our service and so that there is a clear account of the work if a question comes up later. Your details and the car's data are kept encrypted. They are used only to carry out your job and to improve our service. We never sell them and never pass them on for anyone else's use.

Your session is private. We only show a session publicly, on our YouTube channel, if you tick the box for that session, and we hide the number plate, the VIN, your name and your contact details. See our privacy policy.

If something is not ready

If a condition is not met, the session does not start. We rebook you free of charge and the session is not counted. If something changes during the session, for example the charger drops out, the specialist stops at the first safe point and tells you.

Book a specialist session

Car owners with a Pocket, from January 2027

Before your session with John.

John looks at your car together with DEX while you are with it. Please check these first.

  1. You are with the car, parked somewhere safe. Off the road, parking brake on, and you can switch the ignition on and off when asked. Never during a drive.
  2. Everything electrical you do not need is off. Lights, blower, heated screens and seats. If you have a battery charger, connect it.
  3. The Pocket stays in. Leave it plugged in until John says the session is finished, with nothing else in the diagnostic socket.
  4. You have told us what we need to know. The fault, what has already been done to the car, and anything unusual: a remap or tuning, added electrics, a battery you know is weak.
  5. It is your car, or you have the owner's permission.

What a Pocket session covers

Diagnosis, a remote diagnosis by John, module coding, retrofits and resets. Coding is done only when John approves it for your car. He checks the battery first, and if it is too low for the job, the coding waits. Software updates are not done through a Pocket.

Who answers for what

The specialistThe work carried out in the session: the diagnosis given and any coding performed. If coding goes wrong during a session, it is ours to put right, as long as the points above were met.
YouThe car and where it is parked, and anything that follows from one of the points above not being met.
Not coveredFaults that were already on the car, and parts that fail through age or earlier damage. We show you what we found.

Your session is recorded and encrypted

We record every diagnostic session, to monitor and improve our service and so that there is a clear account of the work if a question comes up later. Your details and the car's data are kept encrypted. They are used only to carry out your job and to improve our service. We never sell them and never pass them on for anyone else's use.

Your session is private. We only show a session publicly, on our YouTube channel, if you tick the box for that session, and we hide the number plate, the VIN, your name and your contact details. See our privacy policy.

If you are not ready

We rebook you free of charge and the session is not counted.