Real job 3 to 9 November 2026 · Mercedes GLE diesel
A new sensor. The same fault.
A GLE that kept setting an air mass fault after the sensor was replaced. A recorded road test, a fault that stayed away, then came back in exactly the same situation. We changed our assessment twice, and said so each time.
Fault code
- P0101FAAir mass sensor 1, plausibilityset again on the way to the 9 November read
- 1,297readings on a 21 km road test with a warm engine
- 0.96correlation between boost above its setpoint after lift-off and the exhaust gas flow the control unit calculated
- +203hPa of boost above setpoint when the fault set again, against +124 the first time
The fault.
A Mercedes GLE diesel logged P0101, air mass sensor plausibility. The air mass sensor had already been replaced. The fault was still there.
The first read.
The fault memory and the snapshot stored with the fault were read remotely. The snapshot showed the moment: foot off the pedal, exhaust gas recirculation valve closed, and boost still above its setpoint.
A recorded road test.
The next day the car went out for 21 km while the engine's readings were recorded. The fault did not come back, and the control unit ran its own air mass test and passed it. The recording still showed a pattern: after each lift-off, the more boost stayed above setpoint, the more exhaust gas flow the control unit calculated with the valve closed.
Changing our mind, in writing.
The first read suggested a leaking exhaust gas recirculation valve. The road test made that less likely, and the report said so. It called the fault a likely one-off trip, likely and not proven.
It came back.
On 9 November the fault had set again, in exactly the same situation and with a bigger overshoot. So the second report withdrew the one-off conclusion too. The leading suspect became the turbocharger's boost control on lift-off. The new sensor's own characteristic came second.
Where it stands.
The report gave the garage the checks for the boost control side and asked for the code to be left in place until they were done. Nothing was cleared, coded or written to the car in these sessions.

Who did what.
- The specialist, JohnMore than twenty years in automotive electronics. Chose the road test, read the result, and revised the assessment when the evidence changed.
- DEXWorked in the background: recorded every reading and lined up each lift-off against the stored fault snapshot.
- The garageKept the car through all three sessions and received the checks for the boost control side.
The reports, all 7 pages.
Vehicle identity and the garage's name removed. The report is shown as it was written on the day, as engineering judgement from the values read. We have not been told how the repair ended, so this page does not claim it. This is one job. Every fault is different.





